Road Gear Headache Racks

Custom Wet Kit - Lowboy Trailer

 

Wetkit, Headache Rack, Lightbar

 

Trucks of the Month – Dec. 2017

Warren Truck & Trailer, Inc.’s featured trucks of December 2017 feature lowboy trailer wetkits.  These particular tractors were equipped with aluminum hydraulic tanks, aluminum headache racks, and a specialty light bar.

  • 15 Gallon Aluminum Hydraulic Tank with Oil Level & Temperature Indicator:  Model A4150 by American Mobile Power.  This aluminum tank assembly is constructed using bright diamond and is fully baffled.  The dimensions on this hydraulic tank are 16″ L x 14″ W x 16″ T.
  • Headache Rack: Road Gear – This 68″ X 86″ aluminum headache rack with jail bar features a 24″ x 24″ window.
  • 61″ LED Light Bar – flat mount. Clear/Clear/Clear/Clear, (4) Amber corner LED reflectors, (8) Amber 5″ LED reflectors, (8) Amber 4″ LED reflectors, (2) Amber 2″ LED reflectors, (2) LED work lights, (2) LED S/T/T lights

 

Custom Wet Kits

Warren Truck and Trailer, Inc. offers a wide variety of wet line kit components.  Contact us today for a quote on a custom wetkit installation or parts.  The sales staff at Warren will be happy to help you spec out the perfect wet kit components for your application.  Ask us about our dual purpose wet kits!

Request Wet Line Kit Quote

 

blog
Read More


This tandem axle Volvo tractor was converted to a dump truck by Warren Truck & Trailer, Inc. in Birmingham, AL.  This frame type MSFL Series dump body features an optional tarp system, wood boards, and insulation with polished aluminum panels.

Dump Body of the Week

This week’s dump truck of the week is a tandem Volvo tractor conversion.  Warren receives many requests to convert tractors to dump trucks.  Most older tractors have single frames.  Therefore, Warren recommends using a frame type dump body on these tractors.  However, if you do have a double frame tractor we recommend going with a frameless dump body built with AR-450 high tensile strength steel.  Most of all, Warren has a dump body model to fit most any need!

Tractor To Dump Truck Conversion

So, you are wanting to convert a tractor to a dump truck.  What all will be involved?  Warren will need to know the CT/CA. (cab to tandem measurement or cable to center of the axle for single axle tractors.)  Often times, we convert tractors with existing wet kits in to dump bodies.  In some cases we are able to use the existing PTOs and pumps on the tractor to save our customers money.  This often depends on what application the wet kit was used for.  Usually, pumps and PTOs used for dump trailer wet kits will also work for a dump body conversion.  Call Warren today to find out more on converting your used tractor to a dump truck.

Where To Get a Tractor to Dump Body Conversion Done

See the list below for the five Warren owned installation facilities.  In addition, we have a large dealer network across the US. Contact the Warren location nearest to you for more information on our line of dump bodies.

blog
Read More


Dump Body of the Week

14 ft Frame Type Dump Body

This week’s dump body of the week is a 14 ft frame type dump body sold to The Truck and Trailer Connection in Georgia. This is one of several units we have sold to them out of our Birmingham location. The Warren frame type body is mounted on a Kenworth truck.

14 ft frame type dump body

This unit features the following spec:

F-14 DUMP BODY – FRAME TYPE – 14′

Yardage: 12/14

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 42″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: Yes

Hoist / Cylinder: VTW-63110

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: No

 

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: None

 

DB OPTIONS # 2

2 Driver Side &

Passenger Side Step

1/4 x 2 Tarp Tie Rail

 

 

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 22 gal CCW

Console: Air/Air

Conspicuity Tape: No

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: None

Wires in Conduit Yes

 

PAINT

Color: Warren Black

 

PTO   POWER TAKE OFF

PTO Muncie TG6 Series

 

TARP SYSTEM – installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x17′

Tarp Type: Asphalt

 

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hitch: 30 Ton

Glad Hands: Yes

D Rings: Yes

Tow Hooks: No

Electric Plug: 7 Way

Pup Rigging: No

  

Our F-type, or frame type, dump body is ideal for light to medium duty hauling. We can customize this model with ¼’’ or AR-450 floor for heavier duty application needs.

Visit our sister websites for information on other great Warren products:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
Read More


16 ft Dump Body

Featured Dump Body of the Week

16 ft dump body

This week’s dump body of the week is a 16 ft dump body, currently located at Truckworx in Montgomery. This unit is perfect for everyday hauling and is currently FOR SALE! For information, visit http://www.truckworx.com/inventory/specsheet/?ID=11174955

 

Our frameless dump body is the original workhorse of the Warren dump body line. This steel constructed body has the following spec:

FL-16 – FRAMELESS 16’

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: None

Clear Backup: No

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: Hardwood – 2×8

Covers: No

Wires in Conduit No

Delivery Fuel/Charges: No

PAINT

Color: Warren Black

PTO    POWER TAKE OFF

PTO Muncie CS Series for Allison

TARP SYSTEM

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hook: 30 Ton Rigid

Gladhands: Yes

D Rings: Yes

Plug: 7 Way

 

Call our dedicated sales representative to spec your next dump body at 800-900-2545.

IMG_1058viper red

Our dump bodies have continuous welding throughout for added strength and durability. This unit features a side swing tailgate, but we also offer standard tailgates, as well as air high lift gates.

All of our models can be customized to meet your specific needs. To learn more about our full line of dump bodies, please visit our sister website at www.dumptrucks.com/products/dump-bodies!

Read More


Dump Body of the Week

Square Type Dump Body – FL Series

This week’s dump body of the week is a FL-16 for Bunch Truck Group – Savannah. The FL series is a square type dump body that is the original workhorse of the Warren dump body line. Available with a variety of options, this unit’s specs can be found below.

IMG_0960

FL-16: FRAMELESS DUMP BODY

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

 

 

Options:

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Lights: LED Standard

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Side Boards: Wood Boards

 

 

TAILGATE:

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

Water Tight: None

PAINT

Color: Warren Black

TARP SYSTEM

TARP system – installed

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

POWER TAKE OFF

Customer Provided

 

IMG_0961

 

 

The FL series has 4” channel crossmembers on 12” centers and is constructed from A1011-45 high tensile steel. This square type dump body is perfect for every day hauling and is one of our more popular dump body models.

For information on all of our dump body models, please visit Dumptrucks.com, Products page. You will find pictures and information on the full range of models we offer. Remember, we are happy to customize our dump body models to fit your specifications!

Ready to spec your next dump body? We are here to help! Call our office today to speak to a sales representative for a quote.

Call our dedicated sales team at 800-900-2545!

Read More

1 2 3 5