Road Gear Headache Racks

Custom Wet Kit - Lowboy Trailer

 

Wetkit, Headache Rack, Lightbar

 

Trucks of the Month – Dec. 2017

Warren Truck & Trailer, Inc.’s featured trucks of December 2017 feature lowboy trailer wetkits.  These particular tractors were equipped with aluminum hydraulic tanks, aluminum headache racks, and a specialty light bar.

  • 15 Gallon Aluminum Hydraulic Tank with Oil Level & Temperature Indicator:  Model A4150 by American Mobile Power.  This aluminum tank assembly is constructed using bright diamond and is fully baffled.  The dimensions on this hydraulic tank are 16″ L x 14″ W x 16″ T.
  • Headache Rack: Road Gear – This 68″ X 86″ aluminum headache rack with jail bar features a 24″ x 24″ window.
  • 61″ LED Light Bar – flat mount. Clear/Clear/Clear/Clear, (4) Amber corner LED reflectors, (8) Amber 5″ LED reflectors, (8) Amber 4″ LED reflectors, (2) Amber 2″ LED reflectors, (2) LED work lights, (2) LED S/T/T lights

 

Custom Wet Kits

Warren Truck and Trailer, Inc. offers a wide variety of wet line kit components.  Contact us today for a quote on a custom wetkit installation or parts.  The sales staff at Warren will be happy to help you spec out the perfect wet kit components for your application.  Ask us about our dual purpose wet kits!

Request Wet Line Kit Quote

 

blog
Read More


This tandem axle Volvo tractor was converted to a dump truck by Warren Truck & Trailer, Inc. in Birmingham, AL.  This frame type MSFL Series dump body features an optional tarp system, wood boards, and insulation with polished aluminum panels.

Dump Body of the Week

This week’s dump truck of the week is a tandem Volvo tractor conversion.  Warren receives many requests to convert tractors to dump trucks.  Most older tractors have single frames.  Therefore, Warren recommends using a frame type dump body on these tractors.  However, if you do have a double frame tractor we recommend going with a frameless dump body built with AR-450 high tensile strength steel.  Most of all, Warren has a dump body model to fit most any need!

Tractor To Dump Truck Conversion

So, you are wanting to convert a tractor to a dump truck.  What all will be involved?  Warren will need to know the CT/CA. (cab to tandem measurement or cable to center of the axle for single axle tractors.)  Often times, we convert tractors with existing wet kits in to dump bodies.  In some cases we are able to use the existing PTOs and pumps on the tractor to save our customers money.  This often depends on what application the wet kit was used for.  Usually, pumps and PTOs used for dump trailer wet kits will also work for a dump body conversion.  Call Warren today to find out more on converting your used tractor to a dump truck.

Where To Get a Tractor to Dump Body Conversion Done

See the list below for the five Warren owned installation facilities.  In addition, we have a large dealer network across the US. Contact the Warren location nearest to you for more information on our line of dump bodies.

blog
Read More


Dump Body of the Month

Crossmemberless Dump Body – 10 ft

This month’s featured unit is a 10 ft Crossmemberless Dump body for Valley Equipment and Truck. Valley Equipment and Truck has been a Warren Distributor in the Seattle area for over 25 years, specializing in custom truck body up fits on late model trucks. Check out the Trucks section they have listed on their website!

This unit has the following specs:

Yardage: 7/810 ft Crossmemberless Dump Body
Floor Material: 3/16 AR450
Front / Material: 44″ 10 GA A1011
Side / Material: 10 gauge 36″ taper to 28″ rear
Horizontal Brace: Yes
Hoist / Cylinder: TCL10-5385
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 36″
Slope: 6″
Chains: 5/16″
Double Acting: Yes

Cabshield: Variable Width-1/4 (18″)
Lights: LED Standard
Oval S/T/T: (1) Per Post
Mud Flaps & brackets: Yes

Special Option: Tapered side construction with front head sheet of 44″, sides 36″ high front tapering down to 28″ rear. 8″ board pockets and 6″ slope on tailgate. This unit has an AR-450 floor, which increases body life and durability.

Be sure to check out all of our Warren products by visiting our sister websites:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
Read More



Dump Body of the Week

14 ft Frame Type Dump Body

This week’s dump body of the week is a 14 ft frame type dump body sold to The Truck and Trailer Connection in Georgia. This is one of several units we have sold to them out of our Birmingham location. The Warren frame type body is mounted on a Kenworth truck.

14 ft frame type dump body

This unit features the following spec:

F-14 DUMP BODY – FRAME TYPE – 14′

Yardage: 12/14

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 42″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: Yes

Hoist / Cylinder: VTW-63110

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: No

 

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: None

 

DB OPTIONS # 2

2 Driver Side &

Passenger Side Step

1/4 x 2 Tarp Tie Rail

 

 

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 22 gal CCW

Console: Air/Air

Conspicuity Tape: No

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: None

Wires in Conduit Yes

 

PAINT

Color: Warren Black

 

PTO   POWER TAKE OFF

PTO Muncie TG6 Series

 

TARP SYSTEM – installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x17′

Tarp Type: Asphalt

 

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hitch: 30 Ton

Glad Hands: Yes

D Rings: Yes

Tow Hooks: No

Electric Plug: 7 Way

Pup Rigging: No

  

Our F-type, or frame type, dump body is ideal for light to medium duty hauling. We can customize this model with ¼’’ or AR-450 floor for heavier duty application needs.

Visit our sister websites for information on other great Warren products:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
Read More

1 2 3 8