Dump Body of the Month

Crossmemberless Dump Body – 10 ft

This month’s featured unit is a 10 ft Crossmemberless Dump body for Valley Equipment and Truck. Valley Equipment and Truck has been a Warren Distributor in the Seattle area for over 25 years, specializing in custom truck body up fits on late model trucks. Check out the Trucks section they have listed on their website!

This unit has the following specs:

Yardage: 7/810 ft Crossmemberless Dump Body
Floor Material: 3/16 AR450
Front / Material: 44″ 10 GA A1011
Side / Material: 10 gauge 36″ taper to 28″ rear
Horizontal Brace: Yes
Hoist / Cylinder: TCL10-5385
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 36″
Slope: 6″
Chains: 5/16″
Double Acting: Yes

Cabshield: Variable Width-1/4 (18″)
Lights: LED Standard
Oval S/T/T: (1) Per Post
Mud Flaps & brackets: Yes

Special Option: Tapered side construction with front head sheet of 44″, sides 36″ high front tapering down to 28″ rear. 8″ board pockets and 6″ slope on tailgate. This unit has an AR-450 floor, which increases body life and durability.

Be sure to check out all of our Warren products by visiting our sister websites:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
Read More

Dump Body of the Week

Square Type Dump Body – FL Series

This week’s dump body of the week is a FL-16 for Bunch Truck Group – Savannah. The FL series is a square type dump body that is the original workhorse of the Warren dump body line. Available with a variety of options, this unit’s specs can be found below.



Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes




Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Lights: LED Standard

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Side Boards: Wood Boards




Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

Water Tight: None


Color: Warren Black


TARP system – installed

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt


Customer Provided





The FL series has 4” channel crossmembers on 12” centers and is constructed from A1011-45 high tensile steel. This square type dump body is perfect for every day hauling and is one of our more popular dump body models.

For information on all of our dump body models, please visit Dumptrucks.com, Products page. You will find pictures and information on the full range of models we offer. Remember, we are happy to customize our dump body models to fit your specifications!

Ready to spec your next dump body? We are here to help! Call our office today to speak to a sales representative for a quote.

Call our dedicated sales team at 800-900-2545!

Read More

Dump Body of the Week

17 ft Dump Body – WXL Series

This week’s dump body of the week is a 17 ft dump body for Palm Peterbilt in Florida. This is one of ten units we are doing for this great customer. These crossmemberless dump bodies have several special features including strobe lights and a cap angle on the sides and tailgate.

17 ft dump body

Yardage: 21/22

Floor Material: 1/4 AR450 HARDOX

Front / Material: 60″ 10 GA A1011

Side / Material: 56″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: Yes

Hoist / Cylinder: VTLW-74135

Hydraulics: YesIMG_0825 copy


Air Operated: Yes

Panel: 9

Material: 7 GA A1011

Height: 58″

Slope: 6″

Chains: 5/16″


Cabshield: Full Width-3/4 (36″)

Asphalt Apron: 12″ Push Type

Lights: LED Standard

Oval S/T/T: (2) Per Post

Red & Amber Strobe**


Cap Angle Sides & Tailgate

(2) Rear Amber Strobes

(2) Mid Body Turn Signals

** 22″ Overhange for Paving **


Hydraulic Hoses/Fittings: Yes

Pump: 22 gal w/air shift CW

Console: Air/Air

Mudflaps and Brackets: YesIMG_0831 copy



Color: Blue Metallic


PTO Muncie CS Series (Auto)

W/ Overspeed Protection **



Brand: Shurco

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: Yes

Tarp Size: 90″x19′

Tarp Type: Asphalt


Pintle Plate: 3/4″

Pintle Hitch: Customer Supplied

Install @ 20″ center

D Rings: Yes

Electric Plug: 7 way


These units have been setup for paving with a 22” overhang. They also have HARDOX AR-450 floors, making them versatile and easily used in a number of applications. Regardless of your application needs, we would be happy to quote your next dump body. We pride ourselves on our quality products and excellent customer service. Call us at 800-900-2545 and let our dedicated sales team help spec your next unit!

Read More

Dump Body of the Week

WAR Series Dump Body

This week’s dump body of the week is a red WAR Series Dump Body that is 16 feet long. Warren’s WAR Series Dump Body is designed for demolition and can be used in severe environments. The bodies feature AR-450 steel, which allows the dump body to withstand rough treatment. This model is also great because it can be used for a variety of applications. With the AR-450 steel and elliptical body, this body can do it all. This week’s featured body was manufactured in our Collins, MS, location and purchased by one of our loyal customers in Cullman, Alabama.

WAR series dump body

This body features the following specs:


Air Operated
Panel “Picture Frame”
Material 1/4″ AR450
Height 64
Double Acting
AIR HIGH LIFT GATE – Watch our YouTube video here

Tarp System:

Donovan Electric


Cabshield Full Width 42″
Asphalt Apron 8″ Push Type
METRO Lights

The tailgate on this WAR Series dump body is our air operated high lift tailgate. This tailgate option is perfect for our WAR series dump body because it allows for easy dumping by means of a switch located inside the cab. It also allows for easy removal of loads without any worry of obstruction as the tailgate lifts completely out of the way.

Watch a video of this Air High Lift Tailgate in action!

WAR High Lift Tailgate

Read More

Dump Body of the Week

Viper Red WAR Series Dump Body

This week’s dump body of the week is a viper red WAR series dump body that is 16ft long. This body was manufactured in Collins, MS, and installed at our Birmingham location. It has a 21 yard capacity and was sold to a loyal customer in Alabama. Drew Dearman, one of our new sales managers, met the customer to pick up the beautiful new body this week. The body is mounted on a red Peterbilt truck. The WAR series dump body is known for its durability as it is designed to endure rugged work.

WAR model dump body

This body has all of our standard features, plus 62” sides and tailgate height:

  • Continuously welded unibody design
  • 8″ I-Beam @ 13.0#/ft. long rails
  • No Crossmembers
  • 1/4″ AR-450
  • 62″ Height (standard 46”)
  • 1/4″ AR-450
  • 4″ x 4″ 1/4″ structural tubing top rails
  • 10″ full depth rear corner post and rear skirt
  • 62″ height (standard 60”)
  • 1/4″ AR-450
  • 3 Panel Horizontal Braced
  • Flush mounted steel tailgate hardware with 1-1/4″ hinges and pins
Front Bulkhead:
  • 60″ height
  • 1/4″ AR-450
Dimensions: Length – 16′
As a company, we believe in relationships. When you buy a dump body manufactured by Warren, you are not only getting a high quality dump body, but also excellent customer service. Whether you are looking for a heavy duty body like the WAR series, or a more standard body like our F/FL Series, we have the right body for your needs. Our dedicated sales team that is willing and ready to help you spec your next dump body.

Call us today at 800.900.2545!

Read More