15 ft Dump Body – Crossmemberless Design – Unit of the Month

This month’s featured unit is a Warren WS-700 model, 15 ft dump body. Our WS-700 model is a crossmemberless body design, reducing weight and buildup under the body. This unit was manufactured at our Mississippi location and installed at Warren Truck & Trailer, LLC. in Talco, Texas. The WS-700 model has a versatile design. These bodies are built to haul aggregate, sand, or asphalt. The high tensile steel construction and unibody design make this a light weight, but still tough unit! We offer this in a variety of lengths and tailgate options. For more information on this model, contact your local Sales Manager.

This unit was manufactured for a customer in Wylie, Texas. This 15 ft dump body has the following spec:

Body:15 ft dump body
Yardage 14/16
Floor / Material 3/16 A1011
Front / Material 50″ 10 GA A1011
Side / Material 42″ 10 GA A1011

Tailgate:
Air Operated Yes
Panel 2 Horizontal
Material 10 GA A1011
Height 50
Slope None
Chains 5/16″
Double Acting Yes

Tow Package:
Pintle Plate 1″
Pintle Hitch 50 Ton
Pup rigging- yes

Special Options:
Diamond plate aluminum covers
Rubrails/Fenders/Lower tailgate

 

 

For more information on other Warren products, please visit our sister company websites:

  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
  • dumptrucks.com – Find information on all of our dump body models
  • fifthwheels.com – Find information on our hydraulic elevating fifth wheels

 

Read More


Underbody Dump Body

The featured unit this month is a U-11 dump body. This underbody dump body was mounted with a Venco Venturo VC516SF-ED hoist. We made the choice to up to a bigger hoist, due to customer hauling needs. This customer requested that we remove the cab shield piece that extends over the cab horizontally. They prefer this look without the cab shield extended piece. Warren is always happy to accommodate special requests!

This customer is located in Prattville, AL, and their fleet features all green cab trucks. This customer has a tandem Warren FL-14 and is adding to the fleet.

underbody dump body Body Specs:

DUMP BODY – UNDERBODY – 11′
Yardage: 4/5
Floor Material: 3/16 A1011
Front / Material: 24″ 10 GA A1011
Side / Material: 18″ 10 GA A1011
Vertical Side Brace: No
Horizontal Brace: No
Hoist / Cylinder: Venco VC416SF-ED
Hydraulics: Yes

Tailgate – 3 Panel Vertical
Material: 10 GA A1011
Height: 24
Slope: None
Chains: 5/16″
Double Acting: Yes

Warren is now stocking underbody dump bodies in this style in 9 foot and 11 foot lengths.

 

Underbody Dump Body

We have locations in:

Call us today to spec your next unit!

Read More


Dump Body of the Month

Crossmemberless Dump Body – 10 ft

This month’s featured unit is a 10 ft Crossmemberless Dump body for Valley Equipment and Truck. Valley Equipment and Truck has been a Warren Distributor in the Seattle area for over 25 years, specializing in custom truck body up fits on late model trucks. Check out the Trucks section they have listed on their website!

This unit has the following specs:

Yardage: 7/810 ft Crossmemberless Dump Body
Floor Material: 3/16 AR450
Front / Material: 44″ 10 GA A1011
Side / Material: 10 gauge 36″ taper to 28″ rear
Horizontal Brace: Yes
Hoist / Cylinder: TCL10-5385
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 36″
Slope: 6″
Chains: 5/16″
Double Acting: Yes

Cabshield: Variable Width-1/4 (18″)
Lights: LED Standard
Oval S/T/T: (1) Per Post
Mud Flaps & brackets: Yes

Special Option: Tapered side construction with front head sheet of 44″, sides 36″ high front tapering down to 28″ rear. 8″ board pockets and 6″ slope on tailgate. This unit has an AR-450 floor, which increases body life and durability.

Be sure to check out all of our Warren products by visiting our sister websites:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
Read More


16 ft Dump Body

Featured Dump Body of the Week

16 ft dump body

This week’s dump body of the week is a 16 ft dump body, currently located at Truckworx in Montgomery. This unit is perfect for everyday hauling and is currently FOR SALE! For information, visit http://www.truckworx.com/inventory/specsheet/?ID=11174955

 

Our frameless dump body is the original workhorse of the Warren dump body line. This steel constructed body has the following spec:

FL-16 – FRAMELESS 16’

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

TAILGATE

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Bolt On: No

Center Board Pockets No

Lights: LED Standard

Oval S/T/T: None

Clear Backup: No

INSTALL

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Chrome Turnouts: No

Splash/Gravel Guards: No

Side Boards: Hardwood – 2×8

Covers: No

Wires in Conduit No

Delivery Fuel/Charges: No

PAINT

Color: Warren Black

PTO    POWER TAKE OFF

PTO Muncie CS Series for Allison

TARP SYSTEM

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

TOW PACKAGE

Pintle Plate: 3/4″

Pintle Hook: 30 Ton Rigid

Gladhands: Yes

D Rings: Yes

Plug: 7 Way

 

Call our dedicated sales representative to spec your next dump body at 800-900-2545.

IMG_1058viper red

Our dump bodies have continuous welding throughout for added strength and durability. This unit features a side swing tailgate, but we also offer standard tailgates, as well as air high lift gates.

All of our models can be customized to meet your specific needs. To learn more about our full line of dump bodies, please visit our sister website at www.dumptrucks.com/products/dump-bodies!

Read More


Dump Body of the Week

Square Type Dump Body – FL Series

This week’s dump body of the week is a FL-16 for Bunch Truck Group – Savannah. The FL series is a square type dump body that is the original workhorse of the Warren dump body line. Available with a variety of options, this unit’s specs can be found below.

IMG_0960

FL-16: FRAMELESS DUMP BODY

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

 

 

Options:

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Lights: LED Standard

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Side Boards: Wood Boards

 

 

TAILGATE:

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

Water Tight: None

PAINT

Color: Warren Black

TARP SYSTEM

TARP system – installed

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

POWER TAKE OFF

Customer Provided

 

IMG_0961

 

 

The FL series has 4” channel crossmembers on 12” centers and is constructed from A1011-45 high tensile steel. This square type dump body is perfect for every day hauling and is one of our more popular dump body models.

For information on all of our dump body models, please visit Dumptrucks.com, Products page. You will find pictures and information on the full range of models we offer. Remember, we are happy to customize our dump body models to fit your specifications!

Ready to spec your next dump body? We are here to help! Call our office today to speak to a sales representative for a quote.

Call our dedicated sales team at 800-900-2545!

Read More