Dump Body of the Month

Crossmemberless Dump Body – 10 ft

This month’s featured unit is a 10 ft Crossmemberless Dump body for Valley Equipment and Truck. Valley Equipment and Truck has been a Warren Distributor in the Seattle area for over 25 years, specializing in custom truck body up fits on late model trucks. Check out the Trucks section they have listed on their website!

This unit has the following specs:

Yardage: 7/810 ft Crossmemberless Dump Body
Floor Material: 3/16 AR450
Front / Material: 44″ 10 GA A1011
Side / Material: 10 gauge 36″ taper to 28″ rear
Horizontal Brace: Yes
Hoist / Cylinder: TCL10-5385
Hydraulics: Yes

Air Operated: Yes
Panel: 2 Horizontal
Material: 3/16 AR450
Height: 36″
Slope: 6″
Chains: 5/16″
Double Acting: Yes

Cabshield: Variable Width-1/4 (18″)
Lights: LED Standard
Oval S/T/T: (1) Per Post
Mud Flaps & brackets: Yes

Special Option: Tapered side construction with front head sheet of 44″, sides 36″ high front tapering down to 28″ rear. 8″ board pockets and 6″ slope on tailgate. This unit has an AR-450 floor, which increases body life and durability.

Be sure to check out all of our Warren products by visiting our sister websites:

  • dumptrucks.com – See information on other dump body models
  • spreaders.com – Find information on our ag and ice control spreaders
  • feedtrucks.com – Find information on our bulk feed equipment including trailers and bodies
  • warrentrailers.com – See information on our various trailer models including moving floor, dump, refuse, rendering, and transfer trailers
Read More


Dump Body of the Week

Square Type Dump Body – FL Series

This week’s dump body of the week is a FL-16 for Bunch Truck Group – Savannah. The FL series is a square type dump body that is the original workhorse of the Warren dump body line. Available with a variety of options, this unit’s specs can be found below.

IMG_0960

FL-16: FRAMELESS DUMP BODY

Yardage: 13/16

Floor Material: 3/16 A1011

Front / Material: 48″ 10 GA A1011

Side / Material: 40″ 10 GA A1011

Vertical Side Brace: Yes

Horizontal Brace: No

Hoist / Cylinder: VTLW-74135

Hydraulics: Yes

 

 

Options:

Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″

Lights: LED Standard

Hydraulic Hoses/Fittings: Yes

Pump: 35 gal w/air shift CW

Console: Air/Air

Conspicuity Tape: Yes

Mudflaps and Brackets: Yes

Side Boards: Wood Boards

 

 

TAILGATE:

Air Operated: Yes

Panel: 9

Material: 10 GA A1011

Height: 48

Slope: None

Chains: 5/16″

Double Acting: No

High Lift Gate: No

Side Swing – Ground Operated: Yes

** Two-Way Tailgate

Center Opening: No

Material Gate: None

Water Tight: None

PAINT

Color: Warren Black

TARP SYSTEM

TARP system – installed

Installation: Installed

Brand: Donovan

Manual / Electric: Electric

Type: Arm

Aluminum / Steel: Aluminum

Bent Arm: No

Tarp Size: 90″x19′

Tarp Type: Asphalt

POWER TAKE OFF

Customer Provided

 

IMG_0961

 

 

The FL series has 4” channel crossmembers on 12” centers and is constructed from A1011-45 high tensile steel. This square type dump body is perfect for every day hauling and is one of our more popular dump body models.

For information on all of our dump body models, please visit Dumptrucks.com, Products page. You will find pictures and information on the full range of models we offer. Remember, we are happy to customize our dump body models to fit your specifications!

Ready to spec your next dump body? We are here to help! Call our office today to speak to a sales representative for a quote.

Call our dedicated sales team at 800-900-2545!

Read More


Dump Body of the Week: Cross-memberless Dump Body

WXL-16.5

This week’s dump body of the week is a cab matched red cross-memberless dump body. This unit was manufactured in our Mississippi plant and sent to Columbia, SC, for installation. The WXL model dump can be built to your specifications. We built this unit out of all AR-450 steel to be used as a heavy duty dump body. The cross-memberless dump body model allows saved weight while maintaining the square shape that many customers love. 

cross-memberless dump body

 

This  16ft WXR has the following specifications requested by the customer:

DUMP BODY – CROSSMEMBERLESS – 16′-6″
Yardage: 17/20IMG_5906
Floor Material: 1/4 AR450
Front / Material: 56″ 1/4 AR450
Side / Material: 48″ 1/4 AR450
Vertical Side Brace: Yes
Horizontal Brace: Yes
Hoist / Cylinder: VTLW-74135

TAILGATE
Air Operated: Yes
Panel: 2 Horizontal
Material: 1/4 AR450
Height: 56
Slope: 6″
Chains: 5/16″
Double Acting: Yes
High Lift Gate: Air Equipped – can add cylinders later

OPTIONS 1:
Cabshield: Full Width-1/2 (24″)

Asphalt Apron: 8″ Push Type
Center Board Pockets Yes
Lights: LED Standard
Oval S/T/T: (1) Per Post

Pump: PERMCO 35 gal CCW
Console: Air/Air
Conspicuity Tape: Yes
Mudflaps and Brackets: Yes
Side Boards: Pine – 2×8

Color:  RED
POWER TAKE OFF

PTO – Muncie TG8 Series (Manual Transmission)
TARP system – installed
Brand: Donovan
Manual / Electric: Electric
Type: Arm
Aluminum / Steel: Aluminum
Bent Arm: Yes

Tarp Size: 90″x18′
Tarp Type: Asphalt

For more information on our WXL Series Model, please visit our products page. Be sure to look at all of our great dump body model options and remember that we can meet your specific specification on any of our great models.

To get a quote on your next cross-memberless dump body, Call us today at 800-900-2545!

Read More


Warren Dump Body of the Week – 16.5′ WAR Body

heavy duty demolition dump body

Heavy Duty Demolition Dump Body

This week’s featured dump body is a heavy duty demolition dump body manufactured for our great customer, Worldwide Equipment – Columbia. This unit has a special paint job with matching fenders, per the customers request.

Dump Body:IMG_5672 2

Yardage: 19/21
Floor Material: 1/4 AR450
Front / Material: 56″ 1/4 AR450

Side / Material: 54” 1/4 AR450

Vertical Side Brace: No
Horizontal Brace: No
Hoist / Cylinder: VTLW-74135
Hydraulics: Yes
IMG_5674 2

Tailgate:

Air Operated: Yes
Panel: 2 Horizontal
Material: 1/4 AR450
Height: 60
Slope: None
Chains: 5/16″
Double Acting: No
High Lift Gate: No
Water Tight: None

DB OPTIONS # 1

Cabshield: Full Width-1/2 (24”)
Asphalt Apron: 8″ Push Type
Center Board Pockets: Yes
Lights: LED Standard
Oval S/T/T: (1) Per Post
Pump: 35 gal w/air shift CCW

Console: Clutch Shift Air
Conspicuity Tape: Yes
Mudflaps and Brackets: Yes
Side Boards: Pine – 2×8
Covers: No
Wires in Conduit No

Paint:

Color: Metallic Blue
PTO POWER TAKE OFF – PTO Muncie TG8 Series
TARP SYSTEM TARP system – installed
Brand: Donovan
Manual / Electric: Manual

Fender Match – Metallic Blue
Aluminum Tread plate installation

The WAR body is Warren’s heavy duty demolition dump body model. For more information on the options of this elliptical dump body, please visit our sister website www.warrentruckequipment.com. There you will find information on all of our great dump body models. Remember, we can customize any of our models to fit your specific needs.

Ready to get a quote on your next unit? Call us today at 800-900-2545!

Read More